Lamborghini P250 Urraco blog by Lee Griffiths

Lamborghini Urraco front valance repair - part 4

Original chassis number section #15662 tacked back in as well as the spare wheel support.

I've finished welding on the passenger side (RHD) now moving onto the drivers, a little cutting needed first then the end is in sight. Painted the new metal on the passenger side with POR-15 then I'll stone-chip in black and that side will be ready to build the suspension back up.

Once I had welded the drivers side lower valance the last job was to weld on the centre outer valance flat section, fill around the joins and finish. I'll probably just paint the whole lower valance including grills black and with stone-chip texture as it was and is a typical 70's style finish.

You can see inside the left hand front valance. This is under the light pod.

<< Go back to the previous page

Copyright © 2019