Lamborghini P250 Urraco blog by Lee Griffiths

Lamborghini P250 Rear control arms

Time to give the rear control arms a clean and repaint. The ball joints are in good condition, but I found a split in one of the rubber boots which is an MOT failure nowadays and will of course cause the ball joint to wear quickly if dirt gets in. Used an off the shelf boot cover found on ebay from these guys   

Lamborghini Urraco P250 rear suspension rebuild.

Now that the weather has set in (and the MOT has expired) I decided it was time to go through the suspension at each corner. There are a few clunks at the front end so the MOT tester would likely spot issues. I've pulled one rear side off and will go through cleaning and painting the various suspension parts. It's in good condition, just doesn't   

Copyright © 2017 www.urraco.info
GS RU